The injection molding machine, also known as the injection molding machine, is the main molding equipment that uses plastic molding molds to produce various shapes of plastic products from thermoplastic or thermosetting plastics. It can be divided into vertical, horizontal, and fully electric types. The injection molding machine can heat the plastic, apply high pressure to the melted plastic, causing it to pop out and fill the mold cavity. During use, the injection molding machine generates a certain amount of exhaust gas, making the treatment of exhaust gas from the injection molding machine very important. However, existing high-flow exhaust fans still have some shortcomings in practical use, such as: 1. Since the exhaust fan processes exhaust gas during use, especially when the airflow is large, a lot of exhaust gas is discharged, and the existing exhaust fan has a complex structure, making disassembly and cleaning cumbersome; 2. Due to the high power and large vibration amplitude during the use of the exhaust fan, the existing exhaust fan does not have a shock-absorbing function, which may cause the internal structure of the device to loosen or even fall off and be damaged due to large vibration amplitude during use. Therefore, there is an urgent need to provide an injection molding machine that is easy to disassemble and has a shock-absorbing function.Exhaust gas treatment fanIn order to overcome the above shortcomings in the existing technology, technicians have provided a solution for high-flow injection molding machines.

　　By setting fixed screws, it facilitates disassembly between the installation frame and the first and second filter screens, so that when it is necessary to clean the internal structure of the device, only the structure to be cleaned needs to be disassembled for separate cleaning. Additionally, by setting a damping adjustment seat, it can not only dampen the entire device but also adjust the spacing of the damping adjustment seat according to different installation environments, making it easier to clamp and install. To achieve the above objectives, the exhaust gas treatment fan for the injection molding machine adopts the following technical solution: a high-flow injection molding machine exhaust gas treatment fan, including an installation frame, with the first and second filter screens detachably installed on both sides of the installation frame through fixed screws. The bottom of the installation frame is fixedly installed with two fan mounting frames, and the opposite sides of the two fan mounting frames are detachably installed with mounting bases through fixed screws. One side of one mounting base is fixedly connected to a connecting shaft, and one side of the other mounting base is fixedly connected to a reduction motor, with the exhaust fan clamped on one side of the reduction motor. The bottom of the installation frame is movably clamped with a damping adjustment seat. The bottom of the installation frame is provided with an installation sliding groove, and the damping adjustment seat is clamped in the installation sliding groove. The fixed screws include a protective block, and the screws are embedded in the protective block. One end of the screw is threaded with a nut, and the nut is embedded in the installation frame. The protective block is made of a corrosion-resistant material, and the concrete material can be one of fiberglass or copper oxide. The damping adjustment base includes a base sleeve, with a damping spring fixedly installed at the inner bottom of the base sleeve, and the top of the damping spring is fixedly connected to a connecting buffer column. The connecting buffer column is movably clamped in the installation sliding groove, and one side of the connecting buffer column is movably clamped with a limiting screw.Exhaust gas treatment fanThe technical effects and advantages of the above injection molding machine are as follows: 1. In the specific use process, fixed screws are set to facilitate disassembly between the installation frame and the first and second filter screens, so that when it is necessary to clean the internal structure of the device, only the structure to be cleaned needs to be disassembled for separate cleaning; 2. In the specific use process of the injection molding machine exhaust gas treatment fan, by setting the shock-absorbing adjustment seat, it can not only dampen the entire device but also adjust the spacing of the shock-absorbing adjustment seat according to different installation environments, making it easier to clamp and install.

　　上述注塑机Exhaust gas treatment fan的技术效果和优点如下：1、在具体使用过程中，设置了固定螺丝，便于安装架与第一滤网和第二滤网之间的拆卸，这样当需要清洗装置内部时，只需要拆卸待清洗的结构进行单独清洗;2、在注塑机废气处理风机的具体使用过程中，通过设置减震调节座，不仅可以对整个装置进行减震，还可以根据不同的安装环境调节减震调节座的间距，便于夹紧安装。