What is the role of exhaust gas treatment fans in industrial exhaust gas treatment? Industrial exhaust gas is a major cause of air pollution. To protect the environment, the use of exhaust gas treatment fans in the industrial sector is increasing. However, the correct installation of the equipment is crucial, as it affects the application and lifespan of the equipment. Let's learn about their roles below!Exhaust gas treatment fanLet's explore their roles!

　　1.Exhaust gas treatment fanAfter delivery, the user unit should assign a dedicated person to manage the use. Regular inspections should be conducted, and if abnormal sounds or leaks are found, repairs must be made to ensure it can be used later.

　　2. The exhaust gas treatment fan should be installed outdoors, and the pump fan motor should have a rain cover to prevent moisture. Regardless of whether the exhaust gas purification equipment is indoors or outdoors, when using fiberglass or plastic fans, protective covers must be installed to prevent screws from loosening, bearings from breaking, debris from being sucked in, or damage to the impeller that could cause injury or accidents.

　　3. Replacement and ratio of exhaust gas purification liquid: The ratio of the purification absorption liquid is determined by the concentration of the gas source from the user unit. After normal debugging and acceptance of the equipment, it should be submitted to the user administrator.

　　4. Before using the exhaust gas treatment fan, ensure that the pipelines and valves of each system are intact, the selection and ratio of the absorption liquid are correct, and if the absorption liquid does not meet the specified requirements, it must be replenished in a timely manner. When connecting the power supply, please wait 3-5 minutes before turning on the fan. When shutting down the purification system, please turn off the fan for 2-3 minutes before shutting down the pump. Do not turn it on randomly, as it may burn out the motor, clog the packing, and affect the purification effect.

　　5. Do not randomly move the wiring of the blower and pump purified by the exhaust gas treatment fan. Please rotate in the correct direction to avoid reverse rotation. Otherwise, it may damage the motor and cause accidents.

　　Exhaust gas treatment fanIt consists of a multi-wing shell, air intake, and explosion-proof mechanism. The gas discharged from the exhaust port creates a certain wind pressure between the impeller, forming negative pressure at the inlet, thus external air is supplemented by atmospheric pressure. The exhaust volume of the suction fan and centrifugal fan with equal output is large, but the wind pressure is small. The centrifugal fan has a relatively small air volume but high wind pressure. Exhaust gas treatment fans are typically used to replace air in environments with high temperatures or polluted air. Centrifugal fans are used in longer ducted exhaust systems.

　　From the above, it can be seen that some characteristics of exhaust gas treatment fans are suitable for exhaust gas treatment equipment. They are effective in gas exchange in areas with high wind pressure, low vibration, high ambient temperature, or polluted air, and are mechanically washed away, with a sturdy structure and attractive appearance; the wind turbines are all calibrated by electronic balancing machines, which is an advantage of centrifugal blowers used in exhaust gas management.

　　Regarding exhaust gas treatment fans, depending on the size of the fans equipped by the enterprise, if the air volume is small, it cannot completely remove waste, leading to the dispersion of exhaust gas in the workplace. If the air volume is too high, the loss of acidic liquid increases, and the concentration of acid in the acid mist rises. Therefore, it is very important to equip a scientifically reasonable blower.

　　The above introduces the roles of exhaust gas treatment fans. If you want to know more, feel free to contact us!